IMPORTANT: For safety reasons, reader and hardware wiring should only be managed by licensed low voltage technicians. If you are a Sequr system administrator and need assistance with reader or hardware wiring, please reach out to firstname.lastname@example.org for help.
If you are experiencing a continuous beep when powering up a reader, the problem may be being caused by a wiring issue. If the beeper (yellow) wire is touching another wire, it can cause a continuous, high-pitched beep. If this wire is taped and unused, make sure you did not accidentally tape it to the open connection of another wire.
If you've verified that the wiring is sound, continuous beeping may indicate a problem with the reader itself. Though rare, if there is a sudden and drastic drop in power levels, this may cause a reader to fall into a state where it beeps continuously. If this is the case, the reader will need to be inspected by a service technician, and possibly replaced. Please reach out to email@example.com to speak with Sequr Support about setting up a service visit.